Dielectric strength: > 20 kV/mm.
Volume resistivity: > 2.1015 Ω/cm.
Voltage: from 0.6 to 1 kV.
Installation temperature: +0 °C to +40 °C.
Operating temperature after polymerization: -40 °C to +200 °C.
Fast reticulation: less than 10 minutes at 23 °C.
Sealing and insulation of electrical connections.
Ideal for sealing junction boxes installed outdoors or in humid environment, with its preset dosage adapted to the dimensions of most standard junction boxes.
Suitable for sealing outdoor automated devices, intercoms, outdoor electrical and swimming pool installations, etc.
For optimum polymerization, mix Biz'Gel at a temperature close to 23 °C.
Polymerization may be longer if the product is conditioned at lower temperatures.
Dosage preset according to the box to be filled.
Power may be switched back on in less than 10 minutes.
Polymerization, even at low temperatures.
Instructions of use
Remove the tab separating the 2 components.
Mix the components for 30 seconds.
Cut a hole in one of the pouch angles.
Pour the gel into the product to make it watertight.